jn0-520 Exam
juniper networks certified internet associate(jncia-fwv)
- Exam Number/Code : jn0-520
- Exam Name : juniper networks certified internet associate(jncia-fwv)
- Questions and Answers : 119 Q&As
- Update Time: 2010-06-28
- Price:
$ 121.00$ 60.00
Free jn0-520 Demo Download
TestInside offers free demo for JNCIA jn0-520 exam (juniper networks certified internet associate(jncia-fwv)). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Download jn0-520 Exam Pdf Demo
Juniper Networks JNCIA jn0-520 exam braindumps questions and answers
¡¡
Exam : Juniper JN0-520
Title : Juniper(r) Networks Certified Internet Associate(Jncia-Fwv)
1. Click the Exhibit button to view the exhibit.
If A initiates a Web browsing session with B, and the Trust interface of the 5XT is in NAT mode, what could be the source address/port of the packet arriving at host B?
A.10.0.0.5/80
B.10.0.0.5/1099
C.10.0.0.1/1024
D.20.0.0.1/1024
E.1.1.1.250/1024
Answer: E
2. Which policy action is needed in order to add Deep Packet inspection to a policy?
A.IDP
B.Deny
C.Reject
D.Permit
E.Detect
Answer: D
3. When configuring the Untrust interface with an IP address and enabling Telnet and WebUI management, which sequence of steps must be performed to make the interface operational at the end of the configuration sequence?
A.Assign the interface to a zone, define the IP address, enable Web and Telnet services
B.Assign the interface to a zone, define the IP address, accept default management services
C.Assign the interface to a virtual router, define the IP address, enable Web and Telnet services
D.Assign the interface to a zone, define the IP address, define a manage IP address, accept default management services
E.Assign the interface to a virtual router, define the IP address, define a manage IP address, enable Web and Telnet services
Answer: A
4. Which cannot be enabled when creating an Access Policy entry?
A.Setting the tcp-mss size
B.Applying NAT using DIP pools
C.Logging all connections that match the Access Policy
D.Triggering a traffic alarm if traffic goes above 300 Bytes/Sec
E.Scheduling the policy to take effect between Monday through Friday only
Answer: A
5. What is the purpose of the 'Manage-IP' address on a NetScreen device?
A.It defines which range of addresses can access devices connected to the NetScreen
B.It defines a list of addresses that are trusted to perform management on the NetScreen
C.It is used in policy rules to determine which device is allowed to manage the NetScreen
D.It is the address to which an external device connects in order to gain management access to a NetScreen
E.It defines a list of device addresses that can manage the NetScreen without being authenticated prior to session establishment
Answer: D
6. Assuming factory default settings, which statement describes the minimum requirements for WebUI management access?
A.Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access 192.168.1.1
B.Terminate the bootup sequence from the console device, open a browser on the console device and access 192.168.1.1
C.Connect a PC addressed on the 192.168.1.0 subnet to the lowest numbered interface, open a browser and access 192.168.1.1
D.Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a browser to the interface address
E.Using the CLI, assign an IP address to the VLAN1 interface, connect a PC to any interface and open a browser to the VLAN interface address
Answer: C
7. Your VPN tunnel does not pass traffic. You run the "get ike cookie" command and discover that there is no cookie. What two (2) options should you check first?
A.Routes
B.Policy configuration
C.Phase 1 configuration options
D.Phase 2 configuration options
Answer: AC
8. What is the purpose of the 'Permitted IP' address on a NetScreen device?
A.It defines which range of addresses can access devices connected to the NetScreen
B.It defines a list of addresses that are trusted to perform management on the NetScreen
C.It is used in policy rules to determine which user traffic is allowed through the NetScreen
D.It is the address to which an external device connects in order to gain management access to a NetScreen
E.It defines a list of devices whose traffic can pass through the NetScreen without being authenticated
Answer: B
9. Using the CLI, if the startup copy of the ScreenOS on a NS-204 is corrupted, from which two (2) alternate locations can an image be loaded?
A.ROM
B.TFTP server
C.Internal Flash
D.PCMCIA Card
E.Compact Flash Card
Answer: BE
10. What are two (2) benefits of configuring the NetScreen in transparent mode?
A.There is no need for IP addresses even for remote management
B.There is no need to reconfigure the IP addresses of routers or protected servers
C.There is no need to create Mapped or Virtual IPs for incoming traffic to reach protected servers
D.Policies are easier to create since you do not have to include Source and Destination IP addresses
E.The product can support more VPNs and obtain greater throughput because there is less overhead to manage
Answer: BC
11. Which three (3) statements are correct regarding tasks that can be performed only by the Root administrator?
A.reset command
B.unset all command
C.activate/deactivate asset recovery features
D.replace configs from remote devices to flash
E.On-line asset recovery
Answer: BCD
12. You have one VIP configured on your device, using public address 191.111.222. When you configure the policy, what will you select for the VIP, and where will you select it?
A.VIP::1 in the NAT-dst public field
B.VIP::1 as the destination address
C.VIP(191.111.222.5) in the NAT-dst public field
D.VIP(191.111.222.5) as the destination address
Answer: B
13. Which statement is correct regarding administrator privileges?
A.Any Administrator can change their privileges on an as-needed basis
B.Administrator privileges can only be established and changed by the Root Administrator
C.Administrator privileges can be established and changed by the Root and All-privilege Administrator
D.Administrator privileges can only be established by the Root and can be changed by the Root and All-privilege Administrator
Answer: B
14. By default, from which hardware component is the startup copy of the ScreenOS loaded?
A.ROM
B.NVRAM
C.TFTP server
D.Internal Flash
E.PCMCIA Card
Answer: D
Click Online chat to talk with us , get more informations about Juniper Networks JNCIA jn0-520 practice exam study guides questions and answers!
Exam Description
It is well known that jn0-520 exam test is the hot exam of Juniper Networks certification. TestInside offer you all the Q&A of the jn0-520 real test . It is the examination of the perfect combination and it will help you pass jn0-520 exam at the first time!
Why choose TestInside jn0-520 braindumps
Quality and Value for the jn0-520 Exam
100% Guarantee to Pass Your jn0-520 Exam
Downloadable, Interactive jn0-520 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
TestInside jn0-520 Exam Features
Quality and Value for the jn0-520 Exam
TestInside Practice Exams for Juniper Networks jn0-520 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your jn0-520 Exam
If you prepare for the exam using our TestInside testing engine, we guarantee your success in the first attempt. If you do not pass the JNCIA jn0-520 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
Juniper Networks jn0-520 Downloadable, Printable Exams (in PDF format)
Our Exam jn0-520 Preparation Material provides you everything you will need to take your jn0-520 Exam. The jn0-520 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
jn0-520 Downloadable, Interactive Testing engines
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Juniper Networks jn0-520 Exam will provide you with free jn0-520 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the jn0-520 Exam:100% Guarantee to Pass Your JNCIA exam and get your JNCIA Certification.
http://www.wholetestinside.com/ The safer.easier way to get JNCIA Certification.
My Shopping Cart
